What We Do
From a single circuit to a complete RF system, Omega Microwave covers the full path: design, simulation, prototyping, testing and integration, under one roof in Türkiye.
Service 01
RF & Microwave Circuit Design
Custom RF and microwave circuits designed and simulated to your specification, from matching networks and filters through to amplifiers and control circuits.
What you get
A requirements review before any drawing starts
Schematic and layout
EM and circuit simulation results
Design review documentation
{{ADD_OR_EDIT}}
svc-module-design
Connectorized module, housed and labelled
1200 x 800
Service 02
RF & Microwave Module Design
Complete connectorized or surface-mount modules that combine several functions into a single housed, tested unit.
What you get
Block diagram and link budget
PCB and housing design
Thermal and mechanical consideration
Test report for the delivered unit
{{ADD_OR_EDIT}}
svc-mmic-film
Thin-film circuit on ceramic, or a MMIC die
1200 x 800
Service 03
MMIC and Thin/Thick-Film Design
Chip-level and hybrid designs. MMIC design and thin or thick-film circuits on ceramic substrates, for high-frequency, compact and high-reliability applications.
What you get
Technology and process selection
Layout
Simulation
Fabrication coordination
{{ADD_OR_EDIT}}
Service 04 . Core capability
In-House Prototyping
Prototyping in house means we go from design to working hardware quickly. Assembly, machining and RF testing happen here, without waiting on an external supplier.
What you get
Rapid prototype builds
RF measurement, including S-parameters
Design iterations based on measured data
{{ADD_OR_EDIT}}
svc-system-design
Rack, subsystem or block diagram on screen
1200 x 800
Service 05
RF & Microwave System Design
System-level architecture for transmit and receive chains and subsystems, from requirements and link budgets through to component selection and specification.
What you get
Architecture and block diagrams
Link, noise and gain budgets
Component specifications
{{ADD_OR_EDIT}}
svc-system-integration
Integrated subsystem under test
1200 x 800
Service 06
System Integration
We bring modules and subsystems together into a working, tested system, then verify it and support it afterwards.
What you get
Integration and wiring
System-level testing
Acceptance documentation
{{ADD_OR_EDIT}}
svc-waveguide
Waveguide component or transition
1200 x 800
Service 07
Waveguide Design
Waveguide components and transitions for the bands where coaxial loss and power handling become the limiting factor.
What you get
{{ADD_OR_EDIT}}
This section is waiting on your wording. Tell us what the deliverables are and it goes in here.
How we work
Five steps, start to delivery
STEP 01
Requirements
We agree on frequencies, levels, interfaces and the environment the hardware has to survive.
STEP 02
Design & Simulation
Schematic, layout and EM simulation, reviewed before anything is built.
STEP 03
In-House Prototype
Boards, housings and assembly done here, so the first article arrives quickly.
STEP 04
Test & Verify
RF measurement against the agreed specification, with the data written down.
STEP 05
Production & Delivery
Repeat builds, testing on every unit, and support after the parts ship.
Not sure which service fits?
Tell us the requirement and we will recommend the best path, including whether a catalog part already solves it.